Ensure that the lever for the shower faucet is set towards the off position. You don’t wish to get a face full of water. Tape it down in spot to assist prevent it being turned on accidentally.
Make use of the pliers to loosen the coupling that holds the hose for the shower head. If you’re concerned about scratching the metal, wrap the pliers with duct tape or location a rag around the coupling. Remove the shower head once the coupling is loose.Repeat the
procedure in Step two for the other finish in the hose attached towards the shower faucet body. Set the hose aside.Clean off any remnants of Teflon tape or joint compound
about the threads of the shower head as well as the faucet physique. Make use of the steel wool to rub the pipe ends inside the direction on the threads. This can support ensure a very good connection. Wrap the threads on both the head plus the faucet physique with fresh Teflon tape. Trim off any excess.Connect
a single finish from the new hose for the faucet body. Tighten it by hand initially, then an added turn with the pliers. Do the exact same point for the connection in the shower head.
Take away the tape from the faucet deal with. Turn around the shower and verify for leaks. Tighten any couplings if essential.
Post time: Mar-17-2017